Brake System

Why grind brake discs?

Brake disc grinding is to adjust the surface of the brake disc. Smooth rough grooves or disappear by using the blade of a grinder to scrape the surface of the brake disc to increase the friction value between the brake disc and brake pads, reducing noise, which will result in the brake system working at full capacity.

Why grind brake discs? 

Braking, slowing or stopping the car can occur from the friction of brake pads and brake discs. After being used for a while The contact surface of the brake disc may be damaged. grooved or worn It will be less or more depending on the usage. 

​Brake disc grinding is to adjust the surface of the brake disc. Smooth rough grooves or disappear by using the blade of a grinder to scrape the surface of the brake disc to increase the friction value between the

 brake disc and brake pads, reducing noise, which will result in the brake system working at full capacity. efficiency If the brake discs are rusted It can be solved by grinding brake discs. But if it is very rusty should change the plate instead  


 There are two types of grinding methods for brake discs.  


1. Grinding discs close to the wheel or grinding without removing the brake disc It is a grinding disc by using a grinding machine. come in and place next to the brake disc

 without having to remove the brake disc, so it"s convenient and fast. You can adjust the balance of the brake disc at the car.  



2. Grinding plates or grinding discs, 

remove the plates to grind at the grinding plates. It is more step and time consuming than close-wheel grinding. Because the dish out of the grinding machine grinding plate instead. but 

can adjust the angle, degree of grinding blades more than close grinding .


Copyright 2024 All right reserved B-Quik.id